ÚVOD DO DISJOINT SET (ALGORITMUS UNION-FIND) - TECHCODEVIEW.COM

Čo je to dátová štruktúra nesúvislých množín?

Sú tzv disjunktné množiny ak nemajú žiadny spoločný prvok, priesečník množín je nulová množina.

Dátová štruktúra, ktorá uchováva neprekrývajúce sa alebo nesúvisiace podmnožiny prvkov, sa nazýva dátová štruktúra nesúvislých množín. Štruktúra údajov nesúvislých množín podporuje nasledujúce operácie:

Pridanie nových množín do disjunktnej množiny.
Zlúčenie disjunktných množín do jednej disjunktnej množiny pomocou únie prevádzka.
Hľadanie reprezentanta disjunktnej množiny pomocou Nájsť prevádzka.
Skontrolujte, či sú dve sady nesúvislé alebo nie.

Zvážte situáciu s viacerými osobami a nasledujúcimi úlohami, ktoré je potrebné na nich vykonať:

Pridaj nové priateľstvo vzťah , t. j. osoba x sa stane priateľom inej osoby y t. j. pridanie nového prvku do množiny.
Zistite, či individuálne x je priateľ jednotlivca y (priamy alebo nepriamy priateľ)

Príklady:

Dostali sme 10 jednotlivcov, povedzme a, b, c, d, e, f, g, h, i, j

Nasledujú vzťahy, ktoré treba pridať:
a b
b d
c f
c i
j e
g j

Vzhľadom na otázky, či je a priateľ d alebo nie. V podstate potrebujeme vytvoriť nasledujúce 4 skupiny a udržiavať rýchlo dostupné spojenie medzi položkami skupiny:
G1 = {a, b, d}
G2 = {c, f, i}
G3 = {e,g,j}
G4 = {h}

Zistite, či x a y patria do rovnakej skupiny alebo nie, t. j. zistite, či x a y sú priami/nepriami priatelia.

Rozdelenie jednotlivcov do rôznych skupín podľa skupín, do ktorých patria. Táto metóda je známa ako a Disjunktná množina Union ktorá vedie zbierku Disjunktné množiny a každú množinu zastupuje jeden z jej členov.

Na zodpovedanie vyššie uvedenej otázky je potrebné zvážiť dva kľúčové body:

Ako vyriešiť sady? Spočiatku všetky prvky patria do rôznych súborov. Po práci na daných vzťahoch vyberieme člen ako a reprezentatívny . Existuje mnoho spôsobov, ako vybrať zástupcu, jednoduchý je výber s najväčším indexom.
Skontrolujte, či sú 2 osoby v rovnakej skupine? Ak sú zástupcovia dvoch jednotlivcov rovnakí, stanú sa priateľmi.

Použité dátové štruktúry sú:

Pole: Volá sa pole celých čísel rodič[] . Ak sa zaoberáme N položky, i’th prvok poľa predstavuje i’th položku. Presnejšie, i’th prvok poľa Parent[] je rodičom i’tej položky. Tieto vzťahy vytvárajú jeden alebo viac virtuálnych stromov.

strom: Je to a Disjunktný súbor . Ak sú dva prvky v tom istom strome, potom sú v rovnakom Disjunktný súbor . Koreňový uzol (alebo najvyšší uzol) každého stromu sa nazýva reprezentatívny súboru. Vždy je jeden jedinečný zástupca každého súboru. Jednoduchým pravidlom na identifikáciu zástupcu je, ak „i“ je zástupcom súboru Rodič[i] = i . Ak nie som zástupcom jeho súboru, potom ho možno nájsť cestovaním po strome, kým nenájdeme zástupcu.

Operácie na dátových štruktúrach nesúvislých množín:

Nájsť
únie

1. Nájdite:

Dá sa implementovať rekurzívnym prechádzaním rodičovského poľa, kým nenarazíme na uzol, ktorý je jeho rodičom.

C++

// Finds the representative of the set> // that i is an element of> > #include> using> namespace> std;> > int> find(>int> i)> > {> > >// If i is the parent of itself> >if> (parent[i] == i) {> > >// Then i is the representative of> >// this set> >return> i;> >}> >else> {> > >// Else if i is not the parent of> >// itself, then i is not the> >// representative of his set. So we> >// recursively call Find on its parent> >return> find(parent[i]);> >}> }> > // The code is contributed by Nidhi goel>

Java

// Finds the representative of the set> // that i is an element of> import> java.io.*;> > class> GFG {> > >static> int> find(>int> i)> > >{> > >// If i is the parent of itself> >if> (parent[i] == i) {> > >// Then i is the representative of> >// this set> >return> i;> >}> >else> {> > >// Else if i is not the parent of> >// itself, then i is not the> >// representative of his set. So we> >// recursively call Find on its parent> >return> find(parent[i]);> >}> >}> }> > // The code is contributed by Nidhi goel>

Python3

# Finds the representative of the set> # that i is an element of> > def> find(i):> > ># If i is the parent of itself> >if> (parent[i]>=>=> i):> > ># Then i is the representative of> ># this set> >return> i> >else>:> > ># Else if i is not the parent of> ># itself, then i is not the> ># representative of his set. So we> ># recursively call Find on its parent> >return> find(parent[i])> > ># The code is contributed by Nidhi goel>

C#

using> System;> > public> class> GFG{> > >// Finds the representative of the set> >// that i is an element of> >public> static> int> find(>int> i)> >{> > >// If i is the parent of itself> >if> (parent[i] == i) {> > >// Then i is the representative of> >// this set> >return> i;> >}> >else> {> > >// Else if i is not the parent of> >// itself, then i is not the> >// representative of his set. So we> >// recursively call Find on its parent> >return> find(parent[i]);> >}> >}> }>

Javascript

> // Finds the representative of the set> // that i is an element of> > function> find(i)> {> > >// If i is the parent of itself> >if> (parent[i] == i) {> > >// Then i is the representative of> >// this set> >return> i;> >}> >else> {> > >// Else if i is not the parent of> >// itself, then i is not the> >// representative of his set. So we> >// recursively call Find on its parent> >return> find(parent[i]);> >}> }> // The code is contributed by Nidhi goel> >

Časová zložitosť : Tento prístup je neefektívny a v najhoršom prípade môže trvať O(n) čas.

2. Únia:

Trvá to dva prvky ako vstup a nájde zástupcov ich množín pomocou Nájsť a nakoniec umiestni jeden zo stromov (reprezentujúcich množinu) pod koreňový uzol druhého stromu.

C++

// Unites the set that includes i> // and the set that includes j> > #include> using> namespace> std;> > void> union>(>int> i,>int> j) {> > >// Find the representatives> >// (or the root nodes) for the set> >// that includes i> >int> irep =>this>.Find(i),> > >// And do the same for the set> >// that includes j> >int> jrep =>this>.Find(j);> > >// Make the parent of i’s representative> >// be j’s representative effectively> >// moving all of i’s set into j’s set)> >this>.Parent[irep] = jrep;> }>

Java

import> java.util.Arrays;> > public> class> UnionFind {> >private> int>[] parent;> > >public> UnionFind(>int> size) {> >// Initialize the parent array with each element as its own representative> >parent =>new> int>[size];> >for> (>int> i =>0>

; i   parent[i] = i;   }   }     // Find the representative (root) of the set that includes element i   public int find(int i) {   if (parent[i] == i) {   return i; // i is the representative of its own set   }   // Recursively find the representative of the parent until reaching the root   parent[i] = find(parent[i]); // Path compression   return parent[i];   }     // Unite (merge) the set that includes element i and the set that includes element j   public void union(int i, int j) {   int irep = find(i); // Find the representative of set containing i   int jrep = find(j); // Find the representative of set containing j     // Make the representative of i's set be the representative of j's set   parent[irep] = jrep;   }     public static void main(String[] args) {   int size = 5; // Replace with your desired size   UnionFind uf = new UnionFind(size);     // Perform union operations as needed   uf.union(1, 2);   uf.union(3, 4);     // Check if elements are in the same set   boolean inSameSet = uf.find(1) == uf.find(2);   System.out.println('Are 1 and 2 in the same set? ' + inSameSet);   }  }>

Python3

# Unites the set that includes i> # and the set that includes j> > def> union(parent, rank, i, j):> ># Find the representatives> ># (or the root nodes) for the set> ># that includes i> >irep>=> find(parent, i)> > ># And do the same for the set> ># that includes j> >jrep>=> find(parent, j)> > ># Make the parent of i’s representative> ># be j’s representative effectively> ># moving all of i’s set into j’s set)> > >parent[irep]>=> jrep>

C#

using> System;> > public> class> UnionFind> {> >private> int>[] parent;> > >public> UnionFind(>int> size)> >{> >// Initialize the parent array with each element as its own representative> >parent =>new> int>[size];> >for> (>int>

i = 0; i   {   parent[i] = i;   }   }     // Find the representative (root) of the set that includes element i   public int Find(int i)   {   if (parent[i] == i)   {   return i; // i is the representative of its own set   }   // Recursively find the representative of the parent until reaching the root   parent[i] = Find(parent[i]); // Path compression   return parent[i];   }     // Unite (merge) the set that includes element i and the set that includes element j   public void Union(int i, int j)   {   int irep = Find(i); // Find the representative of set containing i   int jrep = Find(j); // Find the representative of set containing j     // Make the representative of i's set be the representative of j's set   parent[irep] = jrep;   }     public static void Main()   {   int size = 5; // Replace with your desired size   UnionFind uf = new UnionFind(size);     // Perform union operations as needed   uf.Union(1, 2);   uf.Union(3, 4);     // Check if elements are in the same set   bool inSameSet = uf.Find(1) == uf.Find(2);   Console.WriteLine('Are 1 and 2 in the same set? ' + inSameSet);   }  }>

Javascript

// JavaScript code for the approach> > // Unites the set that includes i> // and the set that includes j> function> union(parent, rank, i, j)> {> > // Find the representatives> // (or the root nodes) for the set> // that includes i> let irep = find(parent, i);> > // And do the same for the set> // that includes j> let jrep = find(parent, j);> > // Make the parent of i’s representative> // be j’s representative effectively> // moving all of i’s set into j’s set)> > parent[irep] = jrep;> }>

Časová zložitosť : Tento prístup je neefektívny a v najhoršom prípade by mohol viesť k stromu dĺžky O(n).

Optimalizácie (zjednotenie podľa poradia/veľkosti a kompresie cesty):

Účinnosť do značnej miery závisí od toho, ktorý strom je pripojený k druhému . Sú 2 spôsoby, ako sa to dá. Prvým je Union by Rank, ktorý berie do úvahy výšku stromu ako faktor, a druhým je Union by Size, ktorý berie do úvahy veľkosť stromu ako faktor pri pripájaní jedného stromu k druhému. Táto metóda spolu s kompresiou cesty poskytuje zložitosť takmer konštantného času.

Kompresia cesty (Úpravy vyhľadávania ()):

Zrýchľuje štruktúru údajov o stlačenie výšky zo stromov. Dá sa to dosiahnuť vložením malého vyrovnávacieho mechanizmu do Nájsť prevádzka. Ďalšie podrobnosti nájdete v kóde:

C++

// Finds the representative of the set that i> // is an element of.> > #include> using> namespace> std;> > int> find(>int> i)> {> > >// If i is the parent of itself> >if> (Parent[i] == i) {> > >// Then i is the representative> >return> i;> >}> >else> {> > >// Recursively find the representative.> >int> result = find(Parent[i]);> > >// We cache the result by moving i’s node> >// directly under the representative of this> >// set> >Parent[i] = result;> > >// And then we return the result> >return> result;> >}> }>

Java

// Finds the representative of the set that i> // is an element of.> import> java.io.*;> import> java.util.*;> > static> int> find(>int> i)> {> > >// If i is the parent of itself> >if> (Parent[i] == i) {> > >// Then i is the representative> >return> i;> >}> >else> {> > >// Recursively find the representative.> >int> result = find(Parent[i]);> > >// We cache the result by moving i’s node> >// directly under the representative of this> >// set> >Parent[i] = result;> > >// And then we return the result> >return> result;> >}> }> > // The code is contributed by Arushi jindal.>

Python3

# Finds the representative of the set that i> # is an element of.> > > def> find(i):> > ># If i is the parent of itself> >if> Parent[i]>=>=> i:> > ># Then i is the representative> >return> i> >else>:> > ># Recursively find the representative.> >result>=> find(Parent[i])> > ># We cache the result by moving i’s node> ># directly under the representative of this> ># set> >Parent[i]>=> result> > ># And then we return the result> >return> result> > # The code is contributed by Arushi Jindal.>

C#

git status -s

using> System;> > // Finds the representative of the set that i> // is an element of.> public> static> int> find(>int> i)> {> > >// If i is the parent of itself> >if> (Parent[i] == i) {> > >// Then i is the representative> >return> i;> >}> >else> {> > >// Recursively find the representative.> >int> result = find(Parent[i]);> > >// We cache the result by moving i’s node> >// directly under the representative of this> >// set> >Parent[i] = result;> > >// And then we return the result> >return> result;> >}> }> > // The code is contributed by Arushi Jindal.>

Javascript

// Finds the representative of the set that i> // is an element of.> > > function> find(i)> {> > >// If i is the parent of itself> >if> (Parent[i] == i) {> > >// Then i is the representative> >return> i;> >}> >else> {> > >// Recursively find the representative.> >let result = find(Parent[i]);> > >// We cache the result by moving i’s node> >// directly under the representative of this> >// set> >Parent[i] = result;> > >// And then we return the result> >return> result;> >}> }> > // The code is contributed by Arushi Jindal.>

Časová zložitosť : O(log n) v priemere na hovor.

Union podľa Rank :

V prvom rade potrebujeme nové pole celých čísel tzv poradie[] . Veľkosť tohto poľa je rovnaká ako veľkosť rodičovského poľa rodič[] . Ak som zástupcom množiny, hodnosť[i] je výška stromu reprezentujúceho množinu.
Teraz si pripomeňme, že pri operácii Únie nezáleží na tom, ktorý z dvoch stromov sa presunie pod ten druhý. Teraz chceme minimalizovať výšku výsledného stromu. Ak spájame dva stromy (alebo sady), nazvime ich vľavo a vpravo, potom všetko závisí od toho hodnosť ľavice a hodnosť práva .

Ak hodnosť vľavo je nižšia ako hodnosť správny , potom je najlepšie sa pohnúť vľavo pod vpravo , pretože to nezmení poradie sprava (zatiaľ čo pohyb sprava pod zľava by zvýšil výšku). Rovnakým spôsobom, ak je hodnosť praváka menšia ako hodnosť ľavice, mali by sme sa pohybovať vpravo pod ľavou.
Ak sú poradia rovnaké, nezáleží na tom, ktorý strom patrí pod druhý, ale poradie výsledku bude vždy o jedno väčšie ako poradie stromov.

C++

// Unites the set that includes i and the set> // that includes j by rank> > #include> using> namespace> std;> > void> unionbyrank(>int> i,>int> j) {> > >// Find the representatives (or the root nodes)> >// for the set that includes i> >int> irep =>this>.find(i);> > >// And do the same for the set that includes j> >int> jrep =>this>.Find(j);> > >// Elements are in same set, no need to> >// unite anything.> >if> (irep == jrep)> >return>;> > >// Get the rank of i’s tree> >irank = Rank[irep],> > >// Get the rank of j’s tree> >jrank = Rank[jrep];> > >// If i’s rank is less than j’s rank> >if>

(irank     // Then move i under j   this.parent[irep] = jrep;   }     // Else if j’s rank is less than i’s rank   else if (jrank     // Then move j under i   this.Parent[jrep] = irep;   }     // Else if their ranks are the same   else {     // Then move i under j (doesn’t matter   // which one goes where)   this.Parent[irep] = jrep;     // And increment the result tree’s   // rank by 1   Rank[jrep]++;   }  }>

Java

public> class> DisjointSet {> > >private> int>[] parent;> >private> int>[] rank;> > >// Constructor to initialize the DisjointSet data> >// structure> >public> DisjointSet(>int> size)> >{> >parent =>new> int>[size];> >rank =>new> int>[size];> > >// Initialize each element as a separate set with> >// rank 0> >for> (>int> i =>0>

; i   parent[i] = i;   rank[i] = 0;   }   }     // Function to find the representative (or the root   // node) of a set with path compression   private int find(int i)   {   if (parent[i] != i) {   parent[i] = find(parent[i]); // Path compression   }   return parent[i];   }     // Unites the set that includes i and the set that   // includes j by rank   public void unionByRank(int i, int j)   {   // Find the representatives (or the root nodes) for   // the set that includes i and j   int irep = find(i);   int jrep = find(j);     // Elements are in the same set, no need to unite   // anything   if (irep == jrep) {   return;   }     // Get the rank of i's tree   int irank = rank[irep];     // Get the rank of j's tree   int jrank = rank[jrep];     // If i's rank is less than j's rank   if (irank   // Move i under j   parent[irep] = jrep;   }   // Else if j's rank is less than i's rank   else if (jrank   // Move j under i   parent[jrep] = irep;   }   // Else if their ranks are the same   else {   // Move i under j (doesn't matter which one goes   // where)   parent[irep] = jrep;   // Increment the result tree's rank by 1   rank[jrep]++;   }   }     // Example usage   public static void main(String[] args)   {   int size = 5;   DisjointSet ds = new DisjointSet(size);     // Perform some union operations   ds.unionByRank(0, 1);   ds.unionByRank(2, 3);   ds.unionByRank(1, 3);     // Find the representative of each element and print   // the result   for (int i = 0; i   System.out.println(   'Element ' + i   + ' belongs to the set with representative '  + ds.find(i));   }   }  }>

Python3

class> DisjointSet:> >def> __init__(>self>, size):> >self>.parent>=> [i>for> i>in> range>(size)]> >self>.rank>=> [>0>]>*> size> > ># Function to find the representative (or the root node) of a set> >def> find(>self>, i):> ># If i is not the representative of its set, recursively find the representative> >if> self>.parent[i] !>=> i:> >self>.parent[i]>=> self>.find(>self>.parent[i])># Path compression> >return> self>.parent[i]> > ># Unites the set that includes i and the set that includes j by rank> >def> union_by_rank(>self>, i, j):> ># Find the representatives (or the root nodes) for the set that includes i and j> >irep>=> self>.find(i)> >jrep>=> self>.find(j)> > ># Elements are in the same set, no need to unite anything> >if> irep>=>=> jrep:> >return> > ># Get the rank of i's tree> >irank>=> self>.rank[irep]> > ># Get the rank of j's tree> >jrank>=> self>.rank[jrep]> > ># If i's rank is less than j's rank> >if>

irank   # Move i under j   self.parent[irep] = jrep   # Else if j's rank is less than i's rank   elif jrank   # Move j under i   self.parent[jrep] = irep   # Else if their ranks are the same   else:   # Move i under j (doesn't matter which one goes where)   self.parent[irep] = jrep   # Increment the result tree's rank by 1   self.rank[jrep] += 1    def main(self):   # Example usage   size = 5  ds = DisjointSet(size)     # Perform some union operations   ds.union_by_rank(0, 1)   ds.union_by_rank(2, 3)   ds.union_by_rank(1, 3)     # Find the representative of each element   for i in range(size):   print(f'Element {i} belongs to the set with representative {ds.find(i)}')      # Creating an instance and calling the main method  ds = DisjointSet(size=5)  ds.main()>

C#

using> System;> > class> DisjointSet {> >private> int>[] parent;> >private> int>[] rank;> > >public> DisjointSet(>int> size) {> >parent =>new> int>[size];> >rank =>new> int>[size];> > >// Initialize each element as a separate set> >for> (>int>

i = 0; i   parent[i] = i;   rank[i] = 0;   }   }     // Function to find the representative (or the root node) of a set   private int Find(int i) {   // If i is not the representative of its set, recursively find the representative   if (parent[i] != i) {   parent[i] = Find(parent[i]); // Path compression   }   return parent[i];   }     // Unites the set that includes i and the set that includes j by rank   public void UnionByRank(int i, int j) {   // Find the representatives (or the root nodes) for the set that includes i and j   int irep = Find(i);   int jrep = Find(j);     // Elements are in the same set, no need to unite anything   if (irep == jrep) {   return;   }     // Get the rank of i's tree   int irank = rank[irep];     // Get the rank of j's tree   int jrank = rank[jrep];     // If i's rank is less than j's rank   if (irank   // Move i under j   parent[irep] = jrep;   }   // Else if j's rank is less than i's rank   else if (jrank   // Move j under i   parent[jrep] = irep;   }   // Else if their ranks are the same   else {   // Move i under j (doesn't matter which one goes where)   parent[irep] = jrep;   // Increment the result tree's rank by 1   rank[jrep]++;   }   }     static void Main() {   // Example usage   int size = 5;   DisjointSet ds = new DisjointSet(size);     // Perform some union operations   ds.UnionByRank(0, 1);   ds.UnionByRank(2, 3);   ds.UnionByRank(1, 3);     // Find the representative of each element   for (int i = 0; i   Console.WriteLine('Element ' + i + ' belongs to the set with representative ' + ds.Find(i));   }   }  }>

Javascript

// JavaScript Program for the above approach> unionbyrank(i, j) {> let irep =>this>.find(i);>// Find representative of set including i> let jrep =>this>.find(j);>// Find representative of set including j> > if> (irep === jrep) {> return>;>// Elements are already in the same set> }> > let irank =>this>.rank[irep];>// Rank of set including i> let jrank =>this>.rank[jrep];>// Rank of set including j> > if>

(irank  this.parent[irep] = jrep; // Make j's representative parent of i's representative  } else if (jrank  this.parent[jrep] = irep; // Make i's representative parent of j's representative  } else {  this.parent[irep] = jrep; // Make j's representative parent of i's representative  this.rank[jrep]++; // Increment the rank of the resulting set  }>

Spojenie podľa veľkosti:

Opäť potrebujeme nové pole celých čísel tzv veľkosť[] . Veľkosť tohto poľa je rovnaká ako veľkosť rodičovského poľa rodič[] . Ak som zástupcom množiny, veľkosť[i] je počet prvkov v strome reprezentujúcich množinu.
Teraz spájame dva stromy (alebo sady), nazvime ich vľavo a vpravo, potom v tomto prípade všetko závisí od veľkosť vľavo a veľkosť vpravo strom (alebo súprava).

Ak veľkosť vľavo je menšia ako veľkosť správny , potom je najlepšie sa pohnúť vľavo pod vpravo a zväčšiť veľkosť sprava o veľkosť zľava. Rovnakým spôsobom, ak je veľkosť pravej strany menšia ako veľkosť ľavej, potom by sme sa mali pohybovať vpravo pod ľavou. a zväčšiť veľkosť vľavo o veľkosť vpravo.
Ak sú veľkosti rovnaké, nezáleží na tom, ktorý strom ide pod druhý.

C++

// Unites the set that includes i and the set> // that includes j by size> > #include> using> namespace> std;> > void> unionBySize(>int> i,>int> j) {> > >// Find the representatives (or the root nodes)> >// for the set that includes i> >int> irep = find(i);> > >// And do the same for the set that includes j> >int> jrep = find(j);> > >// Elements are in the same set, no need to> >// unite anything.> >if> (irep == jrep)> >return>;> > >// Get the size of i’s tree> >int> isize = Size[irep];> > >// Get the size of j’s tree> >int> jsize = Size[jrep];> > >// If i’s size is less than j’s size> >if>

(isize     // Then move i under j   Parent[irep] = jrep;     // Increment j's size by i's size   Size[jrep] += Size[irep];   }     // Else if j’s size is less than i’s size   else {     // Then move j under i   Parent[jrep] = irep;     // Increment i's size by j's size   Size[irep] += Size[jrep];   }  }>

Java

// Java program for the above approach> import> java.util.Arrays;> > class> UnionFind {> > >private> int>[] Parent;> >private> int>[] Size;> > >public> UnionFind(>int> n)> >{> >// Initialize Parent array> >Parent =>new> int>[n];> >for> (>int> i =>0>

; i   Parent[i] = i;   }     // Initialize Size array with 1s   Size = new int[n];   Arrays.fill(Size, 1);   }     // Function to find the representative (or the root   // node) for the set that includes i   public int find(int i)   {   if (Parent[i] != i) {   // Path compression: Make the parent of i the   // root of the set   Parent[i] = find(Parent[i]);   }   return Parent[i];   }     // Unites the set that includes i and the set that   // includes j by size   public void unionBySize(int i, int j)   {   // Find the representatives (or the root nodes) for   // the set that includes i   int irep = find(i);     // And do the same for the set that includes j   int jrep = find(j);     // Elements are in the same set, no need to unite   // anything.   if (irep == jrep)   return;     // Get the size of i’s tree   int isize = Size[irep];     // Get the size of j’s tree   int jsize = Size[jrep];     // If i’s size is less than j’s size   if (isize   // Then move i under j   Parent[irep] = jrep;     // Increment j's size by i's size   Size[jrep] += Size[irep];   }   // Else if j’s size is less than i’s size   else {   // Then move j under i   Parent[jrep] = irep;     // Increment i's size by j's size   Size[irep] += Size[jrep];   }   }  }    public class GFG {     public static void main(String[] args)   {   // Example usage   int n = 5;   UnionFind unionFind = new UnionFind(n);     // Perform union operations   unionFind.unionBySize(0, 1);   unionFind.unionBySize(2, 3);   unionFind.unionBySize(0, 4);     // Print the representative of each element after   // unions   for (int i = 0; i   System.out.println('Element ' + i   + ': Representative = '  + unionFind.find(i));   }   }  }    // This code is contributed by Susobhan Akhuli>

Python3

# Python program for the above approach> class> UnionFind:> >def> __init__(>self>, n):> ># Initialize Parent array> >self>.Parent>=> list>(>range>(n))> > ># Initialize Size array with 1s> >self>.Size>=> [>1>]>*> n> > ># Function to find the representative (or the root node) for the set that includes i> >def> find(>self>, i):> >if> self>.Parent[i] !>=> i:> ># Path compression: Make the parent of i the root of the set> >self>.Parent[i]>=> self>.find(>self>.Parent[i])> >return> self>.Parent[i]> > ># Unites the set that includes i and the set that includes j by size> >def> unionBySize(>self>, i, j):> ># Find the representatives (or the root nodes) for the set that includes i> >irep>=> self>.find(i)> > ># And do the same for the set that includes j> >jrep>=> self>.find(j)> > ># Elements are in the same set, no need to unite anything.> >if> irep>=>=> jrep:> >return> > ># Get the size of i’s tree> >isize>=> self>.Size[irep]> > ># Get the size of j’s tree> >jsize>=> self>.Size[jrep]> > ># If i’s size is less than j’s size> >if>

isize   # Then move i under j   self.Parent[irep] = jrep     # Increment j's size by i's size   self.Size[jrep] += self.Size[irep]   # Else if j’s size is less than i’s size   else:   # Then move j under i   self.Parent[jrep] = irep     # Increment i's size by j's size   self.Size[irep] += self.Size[jrep]    # Example usage  n = 5 unionFind = UnionFind(n)    # Perform union operations  unionFind.unionBySize(0, 1)  unionFind.unionBySize(2, 3)  unionFind.unionBySize(0, 4)    # Print the representative of each element after unions  for i in range(n):   print('Element {}: Representative = {}'.format(i, unionFind.find(i)))    # This code is contributed by Susobhan Akhuli>

C#

using> System;> > class> UnionFind> {> >private> int>[] Parent;> >private> int>[] Size;> > >public> UnionFind(>int> n)> >{> >// Initialize Parent array> >Parent =>new> int>[n];> >for> (>int>

i = 0; i   {   Parent[i] = i;   }     // Initialize Size array with 1s   Size = new int[n];   for (int i = 0; i   {   Size[i] = 1;   }   }     // Function to find the representative (or the root node) for the set that includes i   public int Find(int i)   {   if (Parent[i] != i)   {   // Path compression: Make the parent of i the root of the set   Parent[i] = Find(Parent[i]);   }   return Parent[i];   }     // Unites the set that includes i and the set that includes j by size   public void UnionBySize(int i, int j)   {   // Find the representatives (or the root nodes) for the set that includes i   int irep = Find(i);     // And do the same for the set that includes j   int jrep = Find(j);     // Elements are in the same set, no need to unite anything.   if (irep == jrep)   return;     // Get the size of i’s tree   int isize = Size[irep];     // Get the size of j’s tree   int jsize = Size[jrep];     // If i’s size is less than j’s size   if (isize   {   // Then move i under j   Parent[irep] = jrep;     // Increment j's size by i's size   Size[jrep] += Size[irep];   }   // Else if j’s size is less than i’s size   else  {   // Then move j under i   Parent[jrep] = irep;     // Increment i's size by j's size   Size[irep] += Size[jrep];   }   }  }    class Program  {   static void Main()   {   // Example usage   int n = 5;   UnionFind unionFind = new UnionFind(n);     // Perform union operations   unionFind.UnionBySize(0, 1);   unionFind.UnionBySize(2, 3);   unionFind.UnionBySize(0, 4);     // Print the representative of each element after unions   for (int i = 0; i   {   Console.WriteLine($'Element {i}: Representative = {unionFind.Find(i)}');   }   }  }>

Javascript

unionbysize(i, j) {> >let irep =>this>.find(i);>// Find the representative of the set containing i.> >let jrep =>this>.find(j);>// Find the representative of the set containing j.> > >if> (irep === jrep) {> >return>;>// Elements are already in the same set.> >}> > >let isize =>this>.size[irep];>// Size of the set including i.> >let jsize =>this>.size[jrep];>// Size of the set including j.> > >if>

(isize   // If i's size is less than j's size, make i's representative   // a child of j's representative.   this.parent[irep] = jrep;   this.size[jrep] += this.size[irep]; // Increment j's size by i's size.   } else {   // If j's size is less than or equal to i's size, make j's representative   // a child of i's representative.   this.parent[jrep] = irep;   this.size[irep] += this.size[jrep]; // Increment i's size by j's size.   if (isize === jsize) {   // If sizes are equal, increment the rank of i's representative.   this.rank[irep]++;   }   }   }>

Výkon

Element 0: Representative = 0 Element 1: Representative = 0 Element 2: Representative = 2 Element 3: Representative = 2 Element 4: Representative = 0>

Časová zložitosť : O(log n) bez kompresie dráhy.

Nižšie je uvedená úplná implementácia disjunktnej množiny s kompresiou cesty a spojením podľa poradia.

C++

// C++ implementation of disjoint set> > #include> using> namespace> std;> > class> DisjSet {> >int> *rank, *parent, n;> > public>:> > >// Constructor to create and> >// initialize sets of n items> >DisjSet(>int> n)> >{> >rank =>new> int>[n];> >parent =>new> int>[n];> >this>->n = n;> >makeSet();> >}> > >// Creates n single item sets> >void> makeSet()> >{> >for> (>int>

i = 0; i   parent[i] = i;   }   }     // Finds set of given item x   int find(int x)   {   // Finds the representative of the set   // that x is an element of   if (parent[x] != x) {     // if x is not the parent of itself   // Then x is not the representative of   // his set,   parent[x] = find(parent[x]);     // so we recursively call Find on its parent   // and move i's node directly under the   // representative of this set   }     return parent[x];   }     // Do union of two sets by rank represented   // by x and y.   void Union(int x, int y)   {   // Find current sets of x and y   int xset = find(x);   int yset = find(y);     // If they are already in same set   if (xset == yset)   return;     // Put smaller ranked item under   // bigger ranked item if ranks are   // different   if (rank[xset]   parent[xset] = yset;   }   else if (rank[xset]>rank[yset]) { parent[yset] = xset;   } // Ak sú hodnosti rovnaké, zvýšte // poradie.   else { parent[yset] = xset;   poradie[xset] = poradie[xset] + 1;   } } };    // Kód ovládača int main() { // Volanie funkcie DisjSet obj(5);   obj.Union(0, 2);   obj.Union(4, 2);   obj.Union(3, 1);     if (obj.find(4) == obj.find(0)) cout<< 'Yes
';   else  cout << 'No
';   if (obj.find(1) == obj.find(0))   cout << 'Yes
';   else  cout << 'No
';     return 0;  }>

Java

// A Java program to implement Disjoint Set Data> // Structure.> import> java.io.*;> import> java.util.*;> > class> DisjointUnionSets {> >int>[] rank, parent;> >int> n;> > >// Constructor> >public> DisjointUnionSets(>int> n)> >{> >rank =>new> int>[n];> >parent =>new> int>[n];> >this>.n = n;> >makeSet();> >}> > >// Creates n sets with single item in each> >void> makeSet()> >{> >for> (>int> i =>0>

; i   // Initially, all elements are in   // their own set.   parent[i] = i;   }   }     // Returns representative of x's set   int find(int x)   {   // Finds the representative of the set   // that x is an element of   if (parent[x] != x) {   // if x is not the parent of itself   // Then x is not the representative of   // his set,   parent[x] = find(parent[x]);     // so we recursively call Find on its parent   // and move i's node directly under the   // representative of this set   }     return parent[x];   }     // Unites the set that includes x and the set   // that includes x   void union(int x, int y)   {   // Find representatives of two sets   int xRoot = find(x), yRoot = find(y);     // Elements are in the same set, no need   // to unite anything.   if (xRoot == yRoot)   return;     // If x's rank is less than y's rank   if (rank[xRoot]     // Then move x under y so that depth   // of tree remains less   parent[xRoot] = yRoot;     // Else if y's rank is less than x's rank   else if (rank[yRoot]     // Then move y under x so that depth of   // tree remains less   parent[yRoot] = xRoot;     else // if ranks are the same   {   // Then move y under x (doesn't matter   // which one goes where)   parent[yRoot] = xRoot;     // And increment the result tree's   // rank by 1   rank[xRoot] = rank[xRoot] + 1;   }   }  }    // Driver code  public class Main {   public static void main(String[] args)   {   // Let there be 5 persons with ids as   // 0, 1, 2, 3 and 4   int n = 5;   DisjointUnionSets dus =   new DisjointUnionSets(n);     // 0 is a friend of 2   dus.union(0, 2);     // 4 is a friend of 2   dus.union(4, 2);     // 3 is a friend of 1   dus.union(3, 1);     // Check if 4 is a friend of 0   if (dus.find(4) == dus.find(0))   System.out.println('Yes');   else  System.out.println('No');     // Check if 1 is a friend of 0   if (dus.find(1) == dus.find(0))   System.out.println('Yes');   else  System.out.println('No');   }  }>

Python3

# Python3 program to implement Disjoint Set Data> # Structure.> > class> DisjSet:> >def> __init__(>self>, n):> ># Constructor to create and> ># initialize sets of n items> >self>.rank>=> [>1>]>*> n> >self>.parent>=> [i>for> i>in> range>(n)]> > > ># Finds set of given item x> >def> find(>self>, x):> > ># Finds the representative of the set> ># that x is an element of> >if> (>self>.parent[x] !>=> x):> > ># if x is not the parent of itself> ># Then x is not the representative of> ># its set,> >self>.parent[x]>=> self>.find(>self>.parent[x])> > ># so we recursively call Find on its parent> ># and move i's node directly under the> ># representative of this set> > >return> self>.parent[x]> > > ># Do union of two sets represented> ># by x and y.> >def> Union(>self>, x, y):> > ># Find current sets of x and y> >xset>=> self>.find(x)> >yset>=> self>.find(y)> > ># If they are already in same set> >if> xset>=>=> yset:> >return> > ># Put smaller ranked item under> ># bigger ranked item if ranks are> ># different> >if> self>.rank[xset] <>self>.rank[yset]:> >self>.parent[xset]>=> yset> > >elif> self>.rank[xset]>>self>.rank[yset]:> >self>.parent[yset]>=> xset> > ># If ranks are same, then move y under> ># x (doesn't matter which one goes where)> ># and increment rank of x's tree> >else>:> >self>.parent[yset]>=> xset> >self>.rank[xset]>=> self>.rank[xset]>+> 1> > # Driver code> obj>=> DisjSet(>5>)> obj.Union(>0>,>2>)> obj.Union(>4>,>2>)> obj.Union(>3>,>1>)> if> obj.find(>4>)>=>=> obj.find(>0>):> >print>(>'Yes'>)> else>:> >print>(>'No'>)> if> obj.find(>1>)>=>=> obj.find(>0>):> >print>(>'Yes'>)> else>:> >print>(>'No'>)> > # This code is contributed by ng24_7.>

C#

// A C# program to implement> // Disjoint Set Data Structure.> using> System;> > class> DisjointUnionSets> {> >int>[] rank, parent;> >int> n;> > >// Constructor> >public> DisjointUnionSets(>int> n)> >{> >rank =>new> int>[n];> >parent =>new> int>[n];> >this>.n = n;> >makeSet();> >}> > >// Creates n sets with single item in each> >public> void> makeSet()> >{> >for> (>int>

i = 0; i   {   // Initially, all elements are in   // their own set.   parent[i] = i;   }   }     // Returns representative of x's set   public int find(int x)   {   // Finds the representative of the set   // that x is an element of   if (parent[x] != x)   {     // if x is not the parent of itself   // Then x is not the representative of   // his set,   parent[x] = find(parent[x]);     // so we recursively call Find on its parent   // and move i's node directly under the   // representative of this set   }   return parent[x];   }     // Unites the set that includes x and   // the set that includes x   public void union(int x, int y)   {   // Find representatives of two sets   int xRoot = find(x), yRoot = find(y);     // Elements are in the same set,   // no need to unite anything.   if (xRoot == yRoot)   return;     // If x's rank is less than y's rank   if (rank[xRoot]     // Then move x under y so that depth   // of tree remains less   parent[xRoot] = yRoot;     // Else if y's rank is less than x's rank   else if (rank[yRoot]     // Then move y under x so that depth of   // tree remains less   parent[yRoot] = xRoot;     else // if ranks are the same   {   // Then move y under x (doesn't matter   // which one goes where)   parent[yRoot] = xRoot;     // And increment the result tree's   // rank by 1   rank[xRoot] = rank[xRoot] + 1;   }   }  }    // Driver code  class GFG  {   public static void Main(String[] args)   {   // Let there be 5 persons with ids as   // 0, 1, 2, 3 and 4   int n = 5;   DisjointUnionSets dus =   new DisjointUnionSets(n);     // 0 is a friend of 2   dus.union(0, 2);     // 4 is a friend of 2   dus.union(4, 2);     // 3 is a friend of 1   dus.union(3, 1);     // Check if 4 is a friend of 0   if (dus.find(4) == dus.find(0))   Console.WriteLine('Yes');   else  Console.WriteLine('No');     // Check if 1 is a friend of 0   if (dus.find(1) == dus.find(0))   Console.WriteLine('Yes');   else  Console.WriteLine('No');   }  }    // This code is contributed by Rajput-Ji>

Javascript

class DisjSet {> >constructor(n) {> >this>.rank =>new> Array(n);> >this>.parent =>new> Array(n);> >this>.n = n;> >this>.makeSet();> >}> > >makeSet() {> >for> (let i = 0; i <>this>.n; i++) {> >this>.parent[i] = i;> >}> >}> > >find(x) {> >if> (>this>.parent[x] !== x) {> >this>.parent[x] =>this>.find(>this>.parent[x]);> >}> >return> this>.parent[x];> >}> > >Union(x, y) {> >let xset =>this>.find(x);> >let yset =>this>.find(y);> > >if> (xset === yset)>return>;> > >if> (>this>.rank[xset] <>this>.rank[yset]) {> >this>.parent[xset] = yset;> >}>else> if> (>this>.rank[xset]>>this>.rank[yset]) {> >this>.parent[yset] = xset;> >}>else> {> >this>.parent[yset] = xset;> >this>.rank[xset] =>this>.rank[xset] + 1;> >}> >}> }> > // usage example> let obj =>new> DisjSet(5);> obj.Union(0, 2);> obj.Union(4, 2);> obj.Union(3, 1);> > if> (obj.find(4) === obj.find(0)) {> >console.log(>'Yes'>);> }>else> {> >console.log(>'No'>);> }> if> (obj.find(1) === obj.find(0)) {> >console.log(>'Yes'>);> }>else> {> >console.log(>'No'>);> }>

Výkon

Yes No>

Časová zložitosť : O(n) na vytvorenie n sád jednotlivých položiek . Dve techniky - kompresia cesty so spojením podľa poradia/veľkosti, časová zložitosť dosiahne takmer konštantný čas. Ukazuje sa, že finále amortizovaná časová zložitosť je O(α(n)), kde α(n) je inverzná Ackermannova funkcia, ktorá rastie veľmi stabilne (nepresahuje ani n<10⁶⁰⁰približne).

Zložitosť priestoru: O(n), pretože potrebujeme uložiť n prvkov v dátovej štruktúre Disjoint Set.

Úvod do disjunktnej množiny (algoritmus Union-Find)

Čo je to dátová štruktúra nesúvislých množín?

Zistite, či x a y patria do rovnakej skupiny alebo nie, t. j. zistite, či x a y sú priami/nepriami priatelia.

Použité dátové štruktúry sú:

Operácie na dátových štruktúrach nesúvislých množín:

1. Nájdite:

C++

Java

Python3

C#

Javascript

2. Únia:

C++

Java

Python3

C#

Javascript

Optimalizácie (zjednotenie podľa poradia/veľkosti a kompresie cesty):

Kompresia cesty (Úpravy vyhľadávania ()):

C++

Java

Python3

C#

Javascript

Union podľa Rank :

C++

Java

Python3

C#

Javascript

Spojenie podľa veľkosti:

C++

Java

Python3

C#

Javascript

Nižšie je uvedená úplná implementácia disjunktnej množiny s kompresiou cesty a spojením podľa poradia.

C++

Java

Python3

C#

Javascript